Cedartubsdirect : Spa Pack for Icon Image Spa Spa-Pack-for-Icon-Image-Spa-131.html en-us Wed, 20 May 2026 00:57:58 -0500 Spa Pack for Icon Image Spa Spa-Pack-for-Icon-Image-Spa-131.html Wed, 20 May 2026 00:57:58 -0500 Message: I have an Icon image spa 631 with two pumps plus a circ pump. All pumps are 240 volt single speed Which spa pack would replace everything. Balboa 2000LE ICON31 06/23/00 on the wiring diagram. sticker on circuit board Icon low end 65 s/n 52297 ***200007224173 

Dated on : 01-20-2013



 

Replies :

You could use a VS501Z, except in that case your existing panel wouldn't work, and if you also bought the panel that goes with that pack, it likely would be size wise a mismatch. VS520SZ would also work, except it is meant to use 2-speed jet pumps and again you would need to buy a matching panel. Thus your best option is to buy the Balboa  EL2000 M3 spa pack, which is an updated version of what you have.  Your existing panel would work. https://www.cedartubsdirect.com/balboa-el2000-hot-tub-heater-el2000-spa-pack-pn-5506504-p-451.html Dieter Technical Support

Post By : Dieter Jung Dated On : 01-20-2013

]]> admin https://blog.cedartubsdirect.com/Spa-Pack-for-Icon-Image-Spa-131.html