Cedartubsdirect : Replacement jet for wood hot tub Replacement-jet-for-wood-hot-tub-264.html en-us Sat, 11 Apr 2026 17:07:44 -0500 Replacement jet for wood hot tub Replacement-jet-for-wood-hot-tub-264.html Sat, 11 Apr 2026 17:07:44 -0500 Message: I have a wood hot tub with jets. I replaced a section of 1.5" flexible tubing but I have a crack in one jet. Can you still get those jets for wood hot tubs? Hydrojet HY10 is what I see in the owners manual. Its the last one is series on the end. I would need two 1.5" plugs for one end and a new gasket for the jet. I can still reuse the threaded jet section inside the tub, but the special wrench would be better than a pipe wrench to remove I am sure. So I would need: Jet housing 2 plugs gasket special tool   You can Paypal me an invoice at above email if that would help. I am in canton NY 13617 for shipping. Thanks!!

Dated on : 02-10-2014


Replies :

 

Michael, We can get you those parts, although we don't sell the jets in parts, just the entire assembly.  However it may be good that you have the inside part, because the jets now only come in white.  I will ask Peter to give you pricing, including shipping.  The expensive part is the tool. Dieter
 

Post By : Dieter Jung Dated On : 02-10-2014

 

Ok just advise on prices . White is fine. May hold off on that tool and doctor up the pipe wrench to not mar up the jet flange.  Thanks

Post By : Michael Platt Dated On : 02-10-2014

 

Dear Michael, I apologize for the delay response. The pricing for the jet is $32.40 The pricing for the 2 (1 1/2") plugs is $6.00 Shipping will be approx $17.00 Please contact me at our office to place your order.  My direct # is 1-800-759-8990 EXT #223 Sincerely Peter Moroz Office Manager Northern Lights Cedar Tubs and Saunas

Post By : Dieter Jung Dated On : 02-11-2014

]]> admin https://blog.cedartubsdirect.com/Replacement-jet-for-wood-hot-tub-264.html