replacement GE motor with pump |
Looking for replacement for a GE motor and pump for hot tub model number: 5KCR48TN2351X
230V, 2sp, 8.8/3.4 amp, 56FR
Can you offer item and price including shipping?
Thank you
|
|
|
|
|
RE: replacement GE motor with pump |
Dear Bob,
We can supply you with a replacement. Although we do not advertise a 56 Frame model online, I do have some in stock. Please give me a call at my office to place an order. Price is $275 for new pump and motor. $45 for shipping as they weigh 33 Lbs
Sincerely
Peter Moroz
Office Manager
NLCT
|
|
|
| |
|
|
|
RE: RE: replacement GE motor with pump |
Thank you for the reply, is the replacement a Balboa? Can you provide the model number? Our motor is labeled GE 5KCR48TN2351x the other lable states Altima-56 model number PUUPC2202582F for a Marquis Hot Tub (P/N 630-6074)
Do you also have a replacement vibration pad?
Do you recommend using a silicone sealant on the intake wet end? (this was apparently the case on the current one) Pump wet ends are 2" with 3"O.D. with center discharge.
I do not need a power cord.
I will call in the am but thought I would send this along in the mean time since I am guessing your office is closed currently. |
|
|
| |
|
|
|
RE: RE: RE: replacement GE motor with pump |
Hello Peter- Have not heard back from you since we spoke since Tuesday. You were going to email me with the details re: the prior questions above. Any updates? I am hoping to get the parts ASAP-
Your assistance is appreciated.
Thank you-
Jan
503-281-8680
|
|
|
| |
|
|
|
RE: RE: RE: RE: replacement GE motor with pump |
Dear Jan,
I apologize for the delayed reply. The model would be Balboa (Ultimax) NIAGARA 2 HP (NA) Pump- PN # 1056010
In regards to the question on the silicone, we recommend that customers use PVC Glue or PVC Cement. Silicon can start to wear away after a few years.
Sincerely
Peter Moroz
NLCT
|
|
|
| |
|
|
|
RE: RE: RE: RE: RE: replacement GE motor with pump |
Thank you Peter! I will get this ordered.
I still am needing the vibration pad(s) for the motor- can you give me a price and part number on them/it.
I will place the order as soon as I hear back from you- excited to get our hot tub back and running!
Thanks again-
Jan
|
|
|
| |
|
|
|
RE: RE: RE: RE: RE: RE: replacement GE motor with pump |
Dear Jan,
I am still trying to determine if there is a vibration pad for this model. I will not be able to confirm until monday.
Once I confirm there is one available or in stock, I will send an update.
Sincerely
Peter Moroz
NLCT
|
|
|
| |
|
|
|
RE: replacement GE motor with pump |
Thank you Peter-
I will check in early Monday -
Have a nice weekend
|
|
|
| |
|
|
|
RE: RE: replacement GE motor with pump |
Dear Jan ,
I have confirmed that we do not have any of the vibration pads for any of the Frame 56 Motor models. We onlyhave them for the pumps with frame 48 Motors,
For your reference, the difference between the 2 types of motors is the physical size of them. The Frame 56 motors are approx 1 inch taller and 1.5 inches longer.
Sincerely
Peter Moroz
Northern Lights Group
|
|
|
| |
|
|
|
|
